How to fix the recorder printing for Edan patient monitors

  1. Check the way the paper is loaded- please do not thread the paper through the roller, close the door on top of the paper.
  2. Test to see if the recorder is turned on and connected by doing a manual printout on side of the printer. See if the green light is on, press start/stop.

If this causes it to print, but the print out options on the monitor are still not working:
3. Check to see that the module is on in the recorder settings
4. Locate the recorder settings in the factory maintain menu and ensure the module is turned on – enter factory maintain password and make sure the recorder module is turned on (set to U)

  1. If the error still persists please create a support ticket or contact us